Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 4-14 Radio0 station mode STA info
MAC Address
: Radio0 MAC address.
Auth Mode
: Authentication mode configured on C1n Series AP/CPE, the
configuration is required to match with the remote AP.
Unicast Cipher
: Unicast cipher mode configured on C1n Series AP/CPE, the
configuration is required to match with the remote AP.
State
: Radio0 current state.
4.2.1.2.5.
AP Info
User may obtain the associated AP information via
Status
Interface
Radio0
AP
Info
. The information includes MAC Address, SSID, SNR (dB), Channel, Max Data Rate,
Throughput AP (Tx/Rx), Data Rate AP (Tx/Rx), and Connected Status.
Figure 4-15 Radio0 station mode AP info
AP MAC Address
: MAC address of remote AP.
SSID
: SSID information of remote AP.
SNR(dB)
: Remote AP SNR (Downlink).
Channel
: Operating channel of remote AP.
Max DataRate
: Maximum data transfer rate between station and remote AP.
Throughput AP(Tx/Rx)
: Actual throughput between station and remote AP.
Data Rate AP
: Actual data transfer rate between station and remote AP.
Connected Status
: Whether Radio0 is connected to remote AP.
4.2.1.3.
Radio0 Interface Status-Repeater Mode
When Radio0’s work mode is configured to Repeater, C1n Series AP/CPE will be
