Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
2.
Check the option in
Keep Network Address Settings
if user wishes to retain the
current IP address.
3.
Press
Reset to Factory Default
Once restore to factory default configuration, user can login to the C1n with the
following information:
C1n Series default IP address:
192.168.1.222
Username:
admin
Password:
admin
6.6.2.
Reset back to factory default via reset button
Figure 6-13 Reset Button
Hardware reset button have 2 functions:
Soft-reboot [equivalent to UI: Reboot).
o
Press & Hold the reset button until you see four signal level LEDs
blink once
o
Then release it immediately
Reset to factory default [equivalent to UI: Reset factory (NOT retain
network address)]
o
Press & Hold the reset button until you see four signal level LEDs
blink once
o
Continue pressing the button until you see four signal level LEDs blink
twice consecutively
o
Then release it immediately
