Alstom Reason RPV311 Скачать руководство пользователя страница 53

Страница: 53 / 350

Chapter 3

– Hardware Design

RPV311

RPV311-TM-EN-6

Figure 6: Front and back views of the RA332

AC or DC power input.

Mains and Ready back panel indicators: Mains is lit when the module is powered-up. Ready indicator

lights up after the module self-test is completed.

Up to 16 analog inputs for voltage, current, or DC transducers, identified as 101 to 116.

Up to 32 digital inputs identified as 201 to 232.

One connector for fiber optic links. The connector has an Act indicator that lights up when its link is active

(i.e., it is receiving requests of the processing module).

Front Panel Indicators: Mains lights up when the module is powered-up. Ready indicator lights up after the

module self-test is completed. The Link1 indicator lights up when active.

Содержание Reason RPV311































































































































































































































































































































































Результаты поиска

Содержание Reason RPV311

Отзывы:

Alstom Reason RPV311, Техническое руководство, Страница: 53 / 350

Результаты поиска

Содержание Reason RPV311

Отзывы: