Alstom Reason RPV311, Техническое руководство, Страница: 341 / 350

Appendix A
– Equipment Log
RPV311
RPV311-TM-EN-6 341
1 EQUIPMENT LOG
The equipment log contains information about:

Threshold violations, fault and disturbance triggers and data recording;

Data record transfer (including the IP address to which data has been transferred);

Access to the unit's configuration pages (including IP address of which the access was performed);

Alarms and the results of auto-diagnosis routines;

Power-up and shutdown.
The equipment log cannot be erased by the user. Its capacity is enough for approximately 5 years of typical
use, with past events being erased if memory space is needed.
Log Description Cause
000 Internal failure Hardware or processing failure
001 Invalid key The key applied to the equipment is not valid
010 Power up Equipment power-up
011 Power off Equipment power-off
012 Auto power-off (primary power failure) Battery operated power time run-out
013 Emergency power-off (low battery) Battery charge below expected, equipment
shut off automatically
020 Primary power OK Primary power supply voltage equipment
021 Primary power NOK Battery backup equipment
029 Battery status [value: ] Battery voltage indication
030 Temperature normal [value: ] Temperature return to normal values
031 Temperature high [value: ] Internal temperature high
039 Temperature status [value: ] Equipment temperature indication
050 Equipment ready Equipment normal operation
051 Equipment not ready Equipment is not operational
100 IRIG-B signal Equipment is connected to IRIG-B signal