pag. 14
MDE/C133 2561 001
MX3IPG2A
-
Twelve LED's, four of which are rigorously dedicated to
general running functions.
-
A four-pin connector in compliance with FCC 68.
By means of a special optoelectrical adapter, an optical
fibre cable and a RS232 optical converter, it allows the
device to be locally linked with a personal computer.
The P.C., through a special interface programme, makes
it possible to read and change the settings, to read the
measurements, the counters, the logged events, the diag-
nostic information and the fault recorder.
6. LCD MENU STRUCTURE
6.1 MAIN READING MENU
The device has a main menu, leading to several sub-menus
(tree structure). All the displays can be made permanent .
[R
Ω
]
Present resistance value
[U- Un ]
Present direct voltage value
ñ ò
[MENU: ENGLISH]
Dialogue language
[ ]
ð
change dialogue language
ñ ò
[DATE ]
present date and time
[TIME ]
ð
change date and time
ñ ò
[SETTINGS: ]
view settings in use
[ MAIN]
ñ ò
[SETTINGS READING]
ð
view main settings
[MAIN ]
ñ ò
[SETTINGS READING]
ð
view spare settings
[SPARE ]
ñ ò
[ MEASUREMENTS ]
ð
View/reset present and stored
[ ]
measurements
ñ ò
[ COUNTERS ]
ð
view counters and
[ P=RESETTABLE ]
reset partial counters
ñ ò
[ EVENTS ]
ð
view
[EVENTO 1=ULTIMO]
stored events
ñ ò
[ OUTPUT RELAYS ]
ð
view output relay
[ ]
settings
ñ ò
[ DIGITAL ]
ð
view digital input
[ INPUTS ]
settings
ñ ò
[ LED ]
ð
view LED settings
[ ]
ñ ò
[ RELAY DATA ]
ð
view model - soft. release
[ ]
and plant identifier
ñ ò
[ DIAGNOSTIC ]
ð
view faults
[ ]
date of last change
6.1.1 Change dialogue language
The default language is ITALIAN.
Here follows an example showing how to change the dialogue
language. Suppose we wish to set ENGLISH as the desired
language.
a) Press the key
ò
or
ñ
until the following message appears
on the display:
[MENU: ITALIAN ]
[ ]
b) By pressing the key
ð
the language change function is
enabled, and the following message appears on the display:
[MENU: ITALIAN ]
[ ]