manualshive.com logo in svg

Alstom MiCOM P54 Series, Техническое руководство, Страница: 72 / 1024

Поделиться
Скачать
Alstom MiCOM P54 Series Скачать руководство пользователя страница 72

P54x/EN GS/La4 

Getting Started

 

(GS) 3-14 

 

MiCOM P543, P544, P545 & P546

 

GS 

1.8.6 

Setting changes 

1. To change the value of a setting, go to the relevant cell in the menu, then press the enter 

key 



to change the cell value.  A flashing cursor on the LCD shows the value can be 

changed.  If a password is required to edit the cell value, a password prompt appears



.

 

2. To change the setting value, press the 

 

or 

 keys.  If the setting to be changed is a 

binary value or a text string, select the required bit or character to be changed using the  

 and 

 keys.

 

3. Press 

 to confirm the new setting value or the clear key 

 to discard it.  The new setting 

is automatically discarded if it is not confirmed in 15 seconds.

 

4. For group settings and disturbance recorder settings, the changes must be confirmed 

before they are used by the relay. 

To do this, when all required changes have been entered, return to the column heading level 
and press the 

 key.  Before returning to the default display the following prompt appears.

 

 

 Update 

settings

 

 Enter 

or 

clear 

 

5. Press 

 to accept the new settings or press 



 to discard the new settings. 

Note:

  

If the menu time-out occurs before the setting changes have been 
confirmed, the setting values are also discarded. 

Control and support settings will be updated immediately after they are entered, without the 
‘Update settings

’ prompt. 

1.9 

Front communication port user interface 

The front communication port is provided by a 9-pin female D-type connector located under 
the bottom hinged cover.  It provides EIA(RS)232 serial data communication and is intended 
for use with a PC locally to the relay (up to 15 m distance) as shown in Figure 6.  This port 
supports the Courier communication protocol only.  Courier is the communication language 
developed by ALSTOM Grid to allow communication with its range of protection relays.  The 
front port is particularly designed for use with the relay settings program MiCOM S1 Studio 
which runs on Windows

TM

 2000 or XP. 

Содержание MiCOM P54 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов