Assembly instructions
Turn Off power supply before starting any installation!
Do not connect the device under power!
Carefully remove the LED luminaire from its packaging.
The luminaire can only be operated on the PEP ceiling / recessed
mounting track PEP-202 and PEP-262 with 48 V DC LED converter.
Ano-
ther operating mode is not provided. Otherwise, the luminaire may fall
down or be destroyed by incorrect power supply (voltage type). Damage
to the product or injuries may result.
Do not bend, tape, pollute, or oil the spring contacts of the luminaire.
Please avoid placing or storing the luminaire on the contacts.
Assembly of the PEP-7xx2
Image 01:
Guide the LED track spotlight slightly oblique into the pre-as-
sembled PEP track. Press the head button
(A)
on the base until the LED
track spotlight fits flush in the track. Turn on the power.
Image 02:
To remove the LED track spotlight, press the head button
(A)
located on the base. The fastening is inactive and the LED light can easily
be removed.
Please note:
Do not pull the lamp head by force! Press the head button
(A)
on the base
again until the LED spotlight can easily be removed.
Disregard will damage the mechanics on the base
and the LED floodlight
will not snap into the track. Do not use LED spotlights with damaged sockets.
They could fall off and cause damage / injuries.
The luminaire base can be used in both installation directions (rotated by
180 °), a polarity in the track is not specified.
02
A
01
A