CARE AND MAINTENANCE
• Clean water is obviously the best way to maintain a
beautiful water feature. Change water frequently and use
water additives. Inquire with your dealer.
• It is not recommended that fountains be left running
during the night or when not at home as the water level
cannot be monitored.
NEVER LET THE FOUNTAIN RUN
DRY!!!
Lack of water will burn out the pump.
The rule of
thumb
is that if a fountain runs continuously for eight
hours you are bound to have to add more water to it.
• Concrete by nature absorbs moisture and in colder
climates, this can have adverse effects on concrete.
Concrete left standing in water, not properly covered or
protected can during freezing temperatures pit, crumble,
or in some cases even crack concrete.
•
Never allow water collected in bowls to freeze
TROUBLESHOOTING
•
Is there enough water in the fountain?
Many require a full water level to operate properly.
•
Is the plastic tubing kinked, blocking the water flow?
•
Did the circuit breaker go off?
•
Is there debris, leaves, mineral buildup, etc. blocking
the intake to the pump?
•
Is there an “airlock” in the pump?
Plug and unplug the pump several times to clear it or pour
water into the tubing.
•
Is the propeller in the pump turning?
Consult pump manufacturer’s directions for servicing
supplied with the pump.
•
Possible leakage?
Check for leaks by filling the fountain without operating the
pump. If you do not see water around the base, it might be
splash out on a windy day or a thirsty pet!
•
Excess splash?
In some cases, water clings to lips or
spillways, causing water to fall erratically. Applying a small
amount of clear silicone at those points where water is
designed to fall could help produce a continuous pour and
reduce splash. Simply place a small amount of silicone on
your finger and lightly apply by pulling down, creating an
up-side-down teardrop for water to follow.
COLOR DISCLAIMER
Each item is finished and antiqued by hand in wide variety
of designer colors. Al's Garden Art products are made of
natural materials and color appearance may vary by
degree of texture, size, shape of area and lighting.
Each work of art is unique and will vary in color. Because
of this Al's Garden Art can not accept any returns of
products not actually matching the colored sample disc or
items on display. Unless properly treated all water
features experience calcium buildup. In addition, cement
products contain minerals associated with efflorescence.
Although our mix design contains minimal amounts of
minerals associated with efflorescence, complete isolation
is impossible.
FITTINGS LIST
Note: Al’s Garden Art supplies the appropriate fittings
required for assembly of each fountain model. This
illustration is for identification purposes only
No. Description
No. Description
AG-01 TUBING,
⅜
"ID ½"OD
AG-90S L BRACKET, SMALL
AG-02 TUBING,
½"ID
⅝
"OD
AG-90 L BRACKET, LARGE
AG-05 BRASS JET
AG-91 COPPER ELBOW, LARGE
AG-08 TUBING, 1"OD
AG-92 COPPER ELBOW, SMALL
AG-15 PERMA GUM
AG-93 COPPER PIPE ½" (4" LONG)
AG-16 WOBBLE WEDGES
AG-94 COPPER PIPE ½" W/VINYL
AG-20 THREADED NIPPLE ½"
AG-95 PVC ½" THREAD TO SLIP
AG-21 THREADED
BARB
¼" AG-97
TUBING,
⅝
"ID ¾"OD
AG-22 PIPE - FEMALE HOSE
AG-99 INLINE CHECK VALVE, ¾”
AG-23 THREAD ½" SLIP ELBOW AG-100 PVC CROSS FITTING, 1”
AG-24 PVC PIPE ½"
AG-103 HP PUMP HOSE
AG-26 DRAIN PLUG
AG-104 PVC PIPE 1"
AG-27 T FITTING (½" BARB)
AG-105 PVC ½" SLIP TO SLIP
AG-28 Y FITTING (½" BARB)
AG-106 COPPER PIPE ½" (6" LONG)
AG-29 PAINT (PAINT/ANTIQUE) AG-107 PVC REDUCER ¾" TO ½"
AG-30 PAINT
AG-108 PVC ½" BALL VALVE
AG-31 ANTIQUE
AG-111 PVC 1½" SLIP FITTING
AG-36 ELBOW (½" SLIP)
AG-112 PVC 1½" PIPE
AG-38 GROMMET
AG-113 PVC 1½" SLIP T
AG-41 ELBOW (½" BARB)
AG-114 PVC 1½" SLIP/TREAD ½"
AG-42 THREAD ½" TO BARB ½" AG-115 PVC ½" TREAD TO TREAD
AG-53 PVC ½" SLIP T
For replacement parts, contact your local Al’s Garden Art
retailer or locate a dealer
at alsgardenart.com
LIMITED WARRANTY
Al's Garden Art offers a one (1) year manufacturers
warranty extended through its dealer network. Please visit
our website (support) at
www.alsgardenart.com
.
For warranty issues you may contact Al’s Garden Art
direct via e-mail at
. Proof of
purchase is required and images may determine cause.
ASSEMBLY INSTRUCTIONS
WALL FOUNTAINS
(self-contained water feature)
Models:
-FW, -FWS, -FCW
Pedestal and Basin Type
AL’S GARDEN ART
Cast stone fountains and statuary manufactured
by Fiore Stone, Inc., family owned and operated
with more then half a century of skill and
passion for creating top quality cast stone art.
