Alpine X009E, Руководство пользователя

Страница: 115 / 212

15
2.2.2 Position markers
2.2.2.1 Vehimarker and Lock-on-Road
When your GPS position is available, the software marks your current
position with the Vehimarker. By default, this marker is a blue arrow, but
you can change this icon in Settings.
When on-road navigation is selected, the Vehimarker may not show your
exact GPS position and heading. If roads are near, it is aligned to the
nearest road to suppress GPS position errors, and the direction of the icon
is aligned to the direction of the road.
If you select off-road navigation: The Vehimarker is at your exact GPS
position. The direction of the icon shows your current heading.
2.2.2.2 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
 Tap the map when navigating,
 Tap the map when you are asked to confirm the destination at the
end of a search, or
 Tap the map in Find on Map (page 58)
When a map location is selected, the Cursor appears at the selected point
on the map. The Cursor is displayed with a radiating red dot ( ) to
make it visible at all zoom levels.
The location of the Cursor can be used as the destination of the route, a
new alert point, you can search for Places around it, or you can save this
location as one of your Favourite destinations.
You can also select some of the objects on the map. If you tap the map at
the icon of a Place of Interest or an alert point, the object will be selected
(you see a red circling border around the object), and you can get
information about this object or use it as a route point.
Alpine_X009E_B5.pdf 15 5/9/2014 14:22:23