7
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Adjusting the Volume
Turn the
flipper switch
clockwise or counterclockwise
to adjust the volume.
Clockwise: Volume up
Counterclockwise: Volume down
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level.
•
This operation can be performed from either a monitor compatible
with touch panel or remote control (sold separately). For operation
from a remote control (sold separately), refer to the owner's manual
of the remote control.
Touch
[MUTE]
on the main source screen to activate the
MUTE mode.
The audio level decreases.
During mute, the volume level indicator will blink.
Screen example
Touching
[MUTE]
again brings the audio back to its previous
level.
Band display
Preset number display
Frequency display
Listening to Radio
1
Press
SOURCE/POWER
.
The source selection screen is displayed.
2
Press the
joystick
up or down to select RADIO, then
press
/
/ENTER
.
3
Press and hold
for at least 2 seconds repeatedly
until the desired radio band is displayed.
FM-1
FM-2
FM-3
MW
LW
FM-1
4
Press
/
/ENTER
to select the tuning mode.
•
The initial mode is Distance mode.
DX SEEK (Distance mode):
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
SEEK (Local mode):
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
OFF (Manual mode):
The frequency is manually tuned in steps (Manual tuning).
5
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
MUTE
Radio
DX SEEK
SEEK
(OFF)
DX SEEK
Joystick
01GB00VPAB222R.book Page 7 Monday, January 23, 2006 4:24 AM
