Alpine PSS-31GM Скачать руководство пользователя страница 1

Chevrolet/GMC

FULL SIZE TRUCK 

˜

 1/31

PSS-31GM

Speaker System for 

Chevrolet/GMC 

Installation Manual

˜

 Model: Select GM Trucks and SUVs

˜

 Model Year: 2014-up Trucks

Introduction

˜ 

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

˜ 

The installation of this product requires specialized skills and experience. We recommend that you have the 

product installed by an authorized Alpine dealer.

˜ 

Before you use this product, be sure to carefully read this installation manual and the separate user's manual 

so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as 
a result of failure to follow the instructions in the manuals.

˜ 

This manual includes a number of symbols that are intended to help you use the product safely, to prevent 

harm to you and others, and to protect against damage to property. These symbols and their meanings are 
listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

 Warning

Ignoring the content marked by this indication and using the product incorrectly is 
expected to lead to death or serious injury.

 Caution

Ignoring the content marked by this indication and using the product incorrectly is only 
expected to lead to injury or property damage.  

(Not compatible with BOSE® Sound System) 

Compatible Vehicles*

Year

Model

Configuration

Trim

Chevrolet

2014-up

Silverado 1500

Crew Cab

WT, LS, LT, LT Z71, LTZ, LTZ Z71

Silverado 2500HD

Crew Cab

WT, LT, LTZ

Silverado 3500HD

Crew Cab

WT, LT, LTZ

GMC

2014-up

Sierra 1500

Crew Cab

Sierra, SLE, SLT

Sierra 2500HD

Crew Cab

Sierra, SLE, SLT

Sierra 3500HD

Crew Cab

Sierra, SLE, SLT

*  The specified vehicles have been tested and have met compatibility specifications at the time of testing. 

Compatibility is not guaranteed if the manufacturer has made production changes to the vehicles listed above.  

Factory systems equipped with Bose are not compatible with this system.

*  Zero space subwoofer has been developed based on Blueprint Acoustics fresh air speaker technology.

Warning: Before you begin wiring, remove the ground wire from the negative 

terminal of the battery. Failing to do so could lead to electric shock, injury or 

improper product operation.

Содержание PSS-31GM
































Отзывы: