background image

Jeep Wrangler

PSS-24WRA V20211025 

˜

 1/15

Jeep Wrangler

PSS-24WRA
Installation Manual

˜

 Model: Wrangler JL 2018-Up

˜

 Model: Gladiator JT 2020-Up

Introduction

˜ 

Congratulations on purchasing the PSS-24WRA. This installation manual is designed to take you through 
the step-by-step installation of PSS-24WRA into a 2018-Up Jeep Wrangler JL or Jeep Gladiator JT 2020-Up. 
Please familiarize yourself with the owners manual as this is a challenging installation. If you still have 
additional questions please call 1-800-TECH-101.

Note

˜ 

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

˜ 

The installation of this product requires specialized skills and experience. This is an installation that is 
challenging and time consuming even for installers with experience. A professional installer would typically 
take a minimum of 4-5 hours to complete this installation. We recommend that you have the product installed 
by an Alpine authorized dealer.

˜ 

Before you use this product, be sure to carefully read this installation manual and the separate user’s manual 
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as 
a result of failure to follow the instructions in the manuals.

˜ 

This manual includes a number of symbols that are intended to help you use the product safely, to prevent 
harm to you and others, and to protect against damage to property. These symbols and their meanings are 
listed below. 
Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

 Warning

Ignoring the content marked by this indication and using the product incorrectly is 
expected to lead to death or serious injury.

 Caution

Ignoring the content marked by this indication and using the product incorrectly is only 
expected to lead to injury or property damage.

Jeep

Model

Year

Wrangler JL**

2018 – Up 

Gladiator JT**

2020 – Up 

** The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is 

not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Содержание PSS-24WRA
















Отзывы: