Alpine KCE-400BT, Руководство пользователя

Страница: 8 / 156

7
-EN
ALPINE KCE-400BT 68-14470Z05-A (EN)
Adjusting the volume when
receiving a Call
While calling, you can adjust the volume. The adjusted
volume level is stored.
Turn the Rotary encoder or the Double
Action encoder to adjust the volume.
• You may need to increase volume from your regular audio
listening source level. However, increasing the volume
excessively may result in feedback. If feedback is noticed as
feedback is directly related to the volume, turn down the
volume as low as acceptable to eliminate it. Positioning the
microphone in a direction away from the main car speakers
(e.g. clipped on sun visor) may also reduce feedback at
high volume.
Redial Function
You can redial the person you have previously called.
After finishing a call, press or within 5
seconds.
The telephone is redialed.
Audio Switching Operation (CD Head
Unit Only)
While making a call, this function allows you to initiate the
transfer of the audio between the mobile phone and the
speakers in the car.
While calling, press and hold ENT for at least 2
seconds to switch the call sound between the
speakers in car and mobile phone.
• Depending on the mobile phone, this operation may not be
performed.
Call History
Call History is recorded for the last dialed/received/missed
calls. There are various ways of making calls based on the
“Call History.” The following steps 1 to 4 are common to the
various ways of making these calls. For details, refer to each
individual category for making calls.
1
Press or .
The outgoing method list is displayed.
2
Turn the Rotary encoder or the Double
Action encoder to select the outgoing
mode.
Setting items : DIALED / RECEIVED / MISSED /
PHONE BOOK
DIALED
: Dialed history
RECEIVED
: Received history
MISSED : Missed incoming history
PHONE BOOK : Mobile phonebook
• The adapter will update the information in the Call History
automatically each time a mobile phone is connected or
receiving/dialing a call. At this time, if you select any
outgoing mode, “UPDATING” will be displayed.
3
Press ENT .
The outgoing mode is activated, and each mode
list is displayed.
• It may take some time for the list to be displayed, and also
directly after connection, the list may not be brought up to
date.
4
Turn the Rotary encoder or the Double
Action encoder to select a name or a
telephone number from the list.
5
Press ENT .
The selected telephone will be called.
If one name has several numbers registered in the
telephone book for CD Head Unit, press
ENT after
selecting the name * , then turn the Rotary encoder
to choose the desired number and press ENT , the
telephone will be called. Press and hold ENT for at
least 2 seconds after selecting the name, the
default number of the name will be called.
Depending on the connected mobile phone, this
function may not be performed. (Only for CD Head
Unit)
* If the name cannot be recognized, default number will be
displayed.
• If you place a call directly from the paired mobile phone,
the phone number is not displayed, you cannot redial from
the unit in this case.