Alpine IVE-W560BT, Руководство пользователя

Страница: 29 / 96

29
-EN
EN
Installation
Caution
Do not block the unit’s heat sink, thus preventing air circulation.
If blocked, heat will accumulate inside the unit and may cause a
fire.
Heat Sink
Rear of the unit
The main unit must be mounted within 45 degrees of the
horizontal plane, back to front.
Less than 45°
1
Remove the mounting sleeve from the main unit.
Slide the mounting sleeve into the dashboard and fix
it with the metal shackles.
Mounting Sleeve
(Included)
Dashboard
This unit
Face plate
(Included)
2
* 2
* 1
Hex Nut (M5)
Screw
Bolt Stud
This unit
Chassis
Ground Lead
Metal
Mounting
Strap
Reinforce the head unit with the metal mounting strap
(not supplied). Secure the ground lead of the unit to a
clean metal spot using a screw (*1) already attached to
the vehicle’s chassis.
• For the screw marked “*
2
”, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming from
the left rear of the IVE-W560BT/IVE-W560BT-R. Connect all
other leads of the IVE-W560BT/IVE-W560BT-R according to
details described in the CONNECTlONS section.
3
Slide the IVE-W560BT/IVE-W560BT-R into the
dashboard until it clicks. This ensures that the unit is
properly locked and will not accidentally come out from
the dashboard.
Installing the Microphone
For safety reasons install the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safe driving of the vehicle.
• Install the microphone in a location where the driver’s voice can
easily be picked up.
Requiring the driver to move towards the microphone for audibility
causes a distraction that could be dangerous.