Alpine IVE-W560BT, Руководство пользователя

Страница: 27 / 96

27
-EN
EN
Specifications
Monitor section
Display type: Wide LCD colour monitor
Dimensions: 6.2 inchs
System: TFT active matrix
Number of pixels:
1,152,000 pixels (800 × 3 (RGB) × 480)
Colour system:
PAL/NTSC/SECAM/PAL-M automatic select
Tuner section
FM
Tuning range:
87.5 – 108.0 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 70 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation at 1 kHz: 30 dB
Frequency response: 20 – 15,000 Hz
AM
Tuning range:
531 – 1,602 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,267 kHz or 9,258 kHz/4.5 kHz
Sensitivity: 44 μV
DVD/CD Player section
Signal-to-noise ratio: 80 dB
Frequency response: 20 – 20,000 Hz
Wow and flutter: Below measurable limit
Harmonic distortion: 0.05%
Region code: Labeled on the bottom of the unit
USB Player section
Interface: USB (Full-speed)
Maximum current: 1 A
Wireless Communication
Communication System:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2 (Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*1
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles *2:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile)
OPP (Object Push Profile)
SPP (Serial Port Profile)
*1 The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna’s performance, operating system, software
application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 50 W × 4 (at 4 ohms)
General
Outputs:
Video output terminal (rear)
Audio output terminals (front, rear/sub switchable)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Inputs:
Illumination control terminal
Remote controller input terminal
Antenna (aerial) input terminal
Microphone input terminal
Parking brake control terminal
Reverse input terminal
Camera input terminal
AUX audio input terminal (Front)
AUX Audio/Video input terminal (Rear)
USB port
External input terminal
Power requirements:
12 V DC car battery (negative ground (earth))
Dimensions:
Approx. 178 mm × 101.5 mm × 169 mm
Mounting dimensions:
Approx.178 mm ×100 mm ×165 mm
Mass:
Approx. 1.7 kg
Package contents:
Main unit (1)
Remote control (1): RUE-4233
Parts for installation and connections (1 set)
Microphone (1)
Design and specifications are subject to change without
notice.
Region code
The region system is used to protect software copyrights.
The region code is located on the bottom of the unit, and
only DVDs labeled with an identical region code can be
played on this unit.
DVDs labeled can also be played.
If you try to play any other DVD, the message [Playback
prohibited by region code.] will appear on the monitor
screen. Depending on the DVD, no region code may be
labeled even though playing the DVD is prohibited by area
restrictions.
Due to continuous product improvement, specifications
and design are subject to change without notice.
The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that there is a possibility that
0.01% of the pixels could be either always ON or OFF.