58
-EN
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of IVA-W505R/IVA-W502R (AUX mode) or to the iPod Direct
connector by using iPod Direct/RCA Interface cable (sold separately)
(AUX+ mode), follow the procedure described below.
•
If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
1
Touch
[SOURCE]
on the main source screen.
The source screen appears on the display.
2
Touch
[AUX]
*
1
or
[AUX+]
*
2
.
The external input screen is displayed.
3
Touch
[NTSC/PAL]
to change the video input.
4
Touch
[COMP./S-VIDEO]
*
3
to switch the video
signal input mode.
The mode switches with each touch.
*
1
The name which is given as the source name in “Setting the AUX
Mode” on page 40 is displayed.
*
2
The mode which is given as the source name in “Setting the AUX
+
Mode” (page 41).
*
3
The video signal can be input in two ways, selecting the right mode
depending on the connection method.
•
If the AUX mode is not displayed on the main menu, set AUX IN to
ON by following “Setting the AUX Mode” (page 40).
•
The setting of switching NTSC/PAL, which you have set in this
section, can be used in same way in “Switching the Visual Input
Signal System” on page 40.
•
The display mode changes by touching
[WIDE]
.
For operation, refer to “Switching Display Modes” on page 29.
•
After connecting the KCA-410C, its AUX input can be used only in
INTERRUPT MODE. For details, refer to the KCA-410C Owner’s
Manual.
•
Switching to the COMP. mode when using the Video Input Connector.
Switching to the S-VIDEO mode when using the S Video Input
Connector.
Operating the TUE-T200DVB (Optional)
Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in “Setting the AUX Mode” (page 40), the
source is displayed in SOURCE selection screen.
1
While your vehicle is parked, touch
[SOURCE]
on
the main source screen.
The source screen appears on the display.
2
Touch
[DVB-T]
.
The DVB-T screen is displayed.
3
Perform the desired operation.
Channel Number Up/Down or Favorite Channel Number
Up/Down
Touch
[CH.]
*
to select changing the Channel or the
Favorite Channel.
Touch CH. [
] or [
] to move the Channel number Up/Down.
Touch FAV [
] or [
] to move the Favorite Channel number Up/
Down.
* The button displays the current changing mode ([CH.] or [FAV]).
Calling up Main Menu Screen
Touch
[MENU]
to call up the main menu screen.
Calling up Menu Operation Mode
1
Touch
[P1/2]
.
The function guide appears.
2
Touch
[MENU CONT]
to call up the menu operation
mode.
Switching the Source
Touch
[BAND].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch
[EPG]
to call up the Electronic Programme Guide.
Scanning Mode
1
Touch
[P1/2]
.
The function guide appears.
2
Touch
[A.MEMO]
to start the auto scan procedure.
•
For detail, refer to the Owner’s Manual of the TUE-T200DVB sold
separately.
Switching the Video Input Mode
Touch
[COMP./S-VIDEO]
.
The video signal input mode switches with each touch.
•
Switching to the COMP. mode when using the Video Input Connector.
Switching to the S-VIDEO mode when using the S Video Input
Connector.
Auxiliary Device
(Optional)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur.
Install the IVA-W505R/IVA-W502R correctly so that the
driver cannot watch TV/Video unless the vehicle is
stopped and the emergency brake is applied.
If the IVA-W505R/IVA-W502R is not installed correctly,
the driver will be able to watch the TV/Video while
driving the vehicle and may be distracted from
looking ahead and cause an accident. The driver or
other people could be severely injured.
TUE-T200DVB
Operation (Optional)
Содержание IVA-W502R
Страница 2: ......
