51
-EN
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to
FLAT in 2.2ch (3WAY) mode (see “Adjusting the Crossover Settings
(X-OVER)” on page 52), as speaker damage may result.
Setting item: TW SETUP
Touch [
] or [
] of TW SETUP to select Maker’s or User’s.
•
The TW Setup mode can only be selected if the FRONT/REAR/
SUBW. (4.2CH)/3WAY (2.2CH) switch on the IMPRINT audio
processor (PXA-H100) is set to 3WAY (2.2CH).
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPod, will be able to reproduce the music clearly even in cars with a lot
of road noise.
Setting item: MEDIA XPANDER
1
Touch
[
]
or
[
]
of MEDIA XPANDER to select ON
or OFF.
2
Touch
[
]
after setting to ON.
The MEDIA XPANDER setup screen appears.
3
Touch
[
]
or
[
]
of the desired MX mode.
•
Music source (such as radio broadcasts and CDs, excluding MW, LW
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
•
When OFF is selected, MX effect of each MX mode will be OFF.
•
Each music source, such as radio, CD and MP3 can have its own MX
setting.
•
MX mode does not function when MX is ON for MW, LW radio.
•
MX CMPM is applied for MP3/WMA/AAC and iPod.
•
The MX setting can be performed only when a source is currently
selected.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Setting item: P-EQ
1
Select L+R by touching
[
]
of P-EQ.
When graphic EQ is set to L+R, this setting will be turned off.
2
Touch
[
]
of P-EQ after selecting L+R.
The P-EQ list screen appears.
3
Adjust the P-EQ to your preference.
Adjusting the Band
Touch [
] or [
] of BAND to select the band to be
adjusted.
BAND 1 / BAND 2 / BAND 3 / BAND 4 / BAND 5
Adjusting the Frequency
Touch
[
]
or
[
]
of FREQ. to adjust the frequency of the
selected band.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
Band-1: 20 Hz~80 Hz (63 Hz)
Band-2: 50 Hz~200 Hz (150 Hz)
Band-3: 125 Hz~3.2 kHz (400 Hz)
Band-4: 315 Hz~8 kHz (1 kHz)
Band-5: 800 Hz~20 kHz (2.5 kHz)
Adjusting the Level
Touch
[
]
or
[
]
of LEVEL to adjust the level of selected
band.
Adjustable level: –6 to +6 dB
Setting the Bandwidth
Touch
[
]
or
[
]
of Q. to select the bandwidth.
Adjustable bandwidth: 1, 1.5, 3
4
To adjust another band, repeat step 3 and adjust all
bands.
•
The frequencies of adjacent bands cannot be adjusted within 4 steps.
•
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
•
When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
Setting the Response Slope for the High
Range Speaker (TW SETUP)
Maker’s:
As protection from possible speaker damage, FLAT
cannot be set for the response slope of the high
range speaker in 2.2ch (3WAY) mode.
User’s:
The FLAT setting is possible in 2.2ch (3WAY) mode.
Setting the MX Level (MEDIA XPANDER)
OFF:
Turns off the MX effect of every music source.
ON:
Turns on the specified MX mode.
(DVD MUSIC)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
Adjusting the Parametric Equalizer Curve
(P-EQ)
Содержание IVA-W502R
Страница 2: ......
