12
-EN
Inserting/Ejecting a Disc
IVA-W505R:
1
Press
OPEN
on the unit.
The display changes to the EJECT/TILT screen.
2
Insert a disc:
Touch
[OPEN]
on the EJECT/TILT screen.
The movable monitor will open, then insert a disc into the
disc slot. Inserting a disc will close the monitor
automatically.
Eject the disc:
Touch
[EJECT]
of DISC on the EJECT/TILT screen.
The movable monitor will open. Then the disc is ejected.
3
Touch
[CLOSE]
on the EJECT/TILT screen.
The movable monitor will close.
IVA-W502R:
Insert the disc:
Press
OPEN
.
The movable monitor will open.
Insert disc in to Disc slot part.
Eject the disc:
Press
OPEN
again.
Disc is ejected.
•
Touching
[
]
returns to the earlier main source screen
(IVA-W505R only).
•
Do not apply shock to the movable monitor when it is open as it may
result in malfunction of the unit.
•
The monitor may be dim during low temperature and immediately
after turning on the power. The brightness will return to normal as
time elapses.
•
The monitor will stop at the set tilt angle when closing.
Adjusting the Monitor Viewing Angle
Adjust the monitor’s angle for better visibility.
IVA-W505R:
1
Press
OPEN
on the unit.
The display changes to the EJECT/TILT screen.
2
Touch
[
]
or
[
]
of TILT to adjust the desired
monitor angle.
The monitor angle can be adjusted in 5 stages.
3
Touch
[
]
to return to the previous screen.
IVA-W502R:
1
Touch
[SETUP]
for the selected source on the main
screen.
The setup selection screen is displayed.
2
Touch
[DISPLAY SETUP]
.
3
Touch
[
]
or
[
]
of TILT to adjust the desired
monitor angle.
Pressing the buttons changes the screen angle by 5 stages.
4
Touch
[
]
to return to the previous screen.
•
This function is adjustable while driving.
•
If the monitor touches an obstacle while the angle is being adjusted,
it will stop immediately.
•
The screen colour will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
•
If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.
•
Touching and holding
[
]
for at least 2 seconds will change to the
main source screen.
Adjusting the Volume
Adjust the volume by pressing
or
.
Volume decreases/increases continuously by pressing and
holding
or
.
Volume: 0 - 35
•
The MUTE function can be performed by using the optional remote
control.
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
movable monitor will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Disc Slot
Содержание IVA-W502R
Страница 2: ......
