![Alpine IVA-D100 Скачать руководство пользователя страница 96](http://html1.mh-extra.com/html/alpine/iva-d100/iva-d100_service-manual_2907746096.webp)
IVA-D100/IVA-D100E
No.
Symbol
I/O
Terminal Description
140
/REVERSE
I
Rear Camera signal input terminal.
141
IN-INT
I
IN-INT signal input terminal.
F-PARK (*1)
I
Foot Brake signal input terminal. (Hi=driving, Lo=stopping)
PULL-UP (*2)
-
Pull-up connect terminal.
143
H-PARK
I
Hand Brake signal input terminal. (Hi=stopping, Lo=driving)
144
P-ANT
O
P-ANT control signal output terminal.
NOTE : (*1) : For IVA-D100 Model Only, (*2) : For IVA-D100E Model Only, Others : Common.
No.
Symbol
I/O
Terminal Description
1
AVREF0
-
Reference voltage input terminal for A/D converter.
2
AVSS
-
GND terminal for A/D,D/A converter.
3
4
5
AVREF1
-
Reference voltage input terminal for D/A converter.
6
VGH-CONT
O
LCD power 13V control signal output terminal.
7
VGL-CONT
O
LCD power supply -16V control signal output terminal.
8
FLMD0
-
at Flash (FLMD0) : Power supply terminal for Flash programming.
at Mask (IC) : GND connect terminal.
9
VDD
-
Power supply terminal.
10
REGC
-
Capacitor connect terminal for regulator.
11
VSS
-
GND terminal.
12
X IN
13
X OUT
14
RESET
I
System Reset signal input terminal.
15
XT IN
16
XT OUT
17
NC
-
No connect terminal.
18
BAT DET
I
Compulsive standby detection input terminal.
19
SUB STBY
I
Standby signal input terminal from MAIN u-COM.
20
DRST
I
On-chip debug mode Reset signal input terminal.
21
ISBUS FIN
I
Frame signal input terminal of u-COM communication between MAIN and
MONITOR.
22
RGB CS
O
Chip Enable signal output terminal to RGB decoder.
23
RGB DO
O
Serial data output terminal to RGB decoder.
24
RGB CLK
O
Clock siganl output terminal to RGB decoder.
25
ISBUS TX
O
TX signal output terminal of u-COM communication between MAIN and MONITOR.
26
ISBUS RX
I
RX signal input terminal of u-COM communication between MAIN and MONITOR.
27
ISBUS FOUT
O
Frame signal output terminal of u-COM communication between MAIN and
MONITOR.
28
NC
-
No connect terminal.
29
Y/COMP SEL
O
Luminance signal / Composite signal switching signal output terminal.
(Hi=Y, Lo=Composite)
30
N/P IN
I
NTSC/PAL automatic distinction signal input terminal.
31
N/P SEL
O
NTSC/PAL switching signal output terminal. (Hi=NTSC, Lo=PAL)
32
SYNC SEL
O
Synchronous siganl switching signal output terminal. (Hi=NAVI side)
33
EVSS
-
GND terminal.
34
EVDD
-
Power supply terminal.
Crystal connect terminal for main clock oscillation.
-
-
Crystal connect terminal for sub clock oscillation.
142
-
NC
No connect terminal.
TO SCHEMATIC
TO CONTENTS
- 96 -