ALPINE HCE-C300R_EN 68-18693Z26-B (A5)
30
-EN
5
Move the measuring tape 40 measuring
marks back from the location in step 4.
40 measuring marks (40 cm)
Tape measure
Make sure that the measure mark values
are the same for both the left and right
calibration sheets.
6
Measure the distance between the
insides of the left and right calibration
sheets and mark the centre spot with
adhesive tape. Move from the centre to
the camera side a distance equivalent to
the numerical value of the camera offset
measured in step 3, and mark that spot
with adhesive tape.
Adhesive tape
Adhesive tape
Camera
Offset
•
7
Place calibration sheet
B
on the ground
so that the sheet centre line aligns with
the offset spot marked in step 6, and
affix calibration sheet
B
to the ground
with adhesive tape so it is parallel with
the measuring tape.
Calibration sheet
B
Offset
Make sure that the measuring tape lines up
with the measure mark values, and are the
same for both the left and right calibration
sheets.
About Operation in
Calibration Mode
1
Press
VIEW
, select the item, and press
SET.
to execute.
VIEW
SET.
VIEW :
Selects a desired item. (The switch
that is selected is enclosed by a
yellow frame.)
SET. :
Executes the selection.
•
Per
Me
Err
mis
perf
If t
the
1
2
T
3
T
•
•
