background image

25

-EN

NO MAGAZINE

Indication for CD Changer

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does

not eject, consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the Eject button to activate the eject function.

When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

Specifications

FM TUNER SECTION

Tuning Range

87.7 – 107.9 MHz

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio

80 dB

Stereo Separation

45 dB

Capture Ratio

2.0 dB

AM TUNER SECTION

Tuning Range

530 – 1,710 kHz

Sensitivity (IEC Standard)

22.5 µV/27 dB

CD PLAYER SECTION

Frequency Response

5 – 20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

REMOTE CONTROL

Battery Type

AAA batteries (2 pcs.)

REMOTE CONTROL SIZE

Width

56 mm (2-1/4")

Height

14 mm (9/16")

Depth

105 mm (4-1/8")

Weight

50 g (1.8 oz)

GENERAL

Power Requirement

14.4 V DC
 (11–16 V allowable)

Maximum Power Output

45 W 

×

 4 (CDA-7867 only)

Maximum Pre-Output Voltage 4 V/10 k ohms
Weight

1.5 kg (3 lbs. 5 oz)

CHASSIS SIZE

Width

178 mm (7")

Height

50 mm (2")

Depth

155 mm (6-1/8")

NOSEPIECE SIZE

Width

165 mm (6–1/2")

Height

46 mm (1-13/16")

Depth

18 mm (11/15")

Due to continuous product improvement, specifications and
design are subject to change without notice.

HIGH-TEMP

ERROR

NO DISC

Содержание CDA-7867

































Отзывы: