12
-EN
the AF list. The “EON” indicator lights up while an RDS EON station is
being received. If the station being received does not broadcast the
traffic information, the receiver automatically tunes in the related
station that broadcasts the traffic information when it occurs.
3
Press and hold
BAND
TA
for at least 2 seconds to
deactivate the Traffic Information mode.
The “TA” indicator goes out.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Press
FUNC.
to activate the function mode while the unit
is in Radio (FM receiving) mode.
2
Press
NEWS 2
to activate the PRIORITY NEWS mode.
The “NEWS” indicator appears in the display.
To disable the PRIORITY NEWS function, press
NEWS 2
.
Note
• In the PRIORITY NEWS function, unlike in the TA function, the
volume does not increase automatically.
3
Press
FUNC.
to activate the preset mode, while the unit is
in Radio (FM receiving) mode.
The (F) indicator goes out.
Note
• Operate the unit while the (F) indicator lights up. If no operation is
performed for 5 seconds, the (F) indicator goes out.
Using iTunes tagging
iTunes Tagging lets you tag songs you hear on RDS stations with your
new CDA-117Ri and then preview, buy, and download them later from
your iTunes Tagged playlist the next time you sync your iPod.
• For details on the iPhone/iPod models usable with this unit, refer to
“Connecting an iPhone/iPod” on page 27.
1
Tune in the desired RDS station.
If there is tag information, “Tag” appears in the display.
2
Press
Tag
while desired song is broadcasting.
The “Tag” blinks at the same time the unit beeps for 2 times and
“Tagging …” is displayed.
3
When completed, “Tag stored” is displayed and the “Tag”
indicator lights up at the same time the unit beeps for
2 times
*
.
*
When completed, “Tag count X” (X is the total amount of stored
tag information) is displayed if no iPhone/iPod is connected.
Notes
• When Beep is set to OFF, there will be no beep sound during operation.
For details, refer to “Sound (Beep) Guide Function” on page 21.
• During tagging, the iPhone/iPod takes priority to save the tag
information. If no iPhone/iPod is connected, the tag information is
saved to this unit.
• When the memory of iPhone/iPod is full, “iPod Memory Full” is
displayed and the unit beeps 2 times. The tag information will be stored
to the unit.
• During tagging, changing the source or RDS station or traffic
information, etc., is received, the tagging will be cancelled; however,
“Cannot Tag” will not be displayed in this case.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “Tuner Memory Full Connect iPod” may be
displayed and the unit beeps 2 times.
• When an iPod that doesn't support the tagging function is connected,
“Non-Tagging iPod” may be displayed.
• When the iPhone/iPod is disconnected from the unit during tagging, its
tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPhone/iPod
supporting the tag function is connected, the stored tag information will
be transferred to the iPhone/iPod automatically. When the iPhone/iPod
memory becomes full, “iPod Memory Full” will be displayed, and any
remaining tag information on the unit will not be transferred to the
iPhone/iPod.
• If tag information already exists, “Already Tagged” will be displayed
when you try to tag information again.
• Tagging may be cancelled by changing the frequency or station, and the
message “Cannot Tag” , etc., may not be displayed.
• If a song is tagged and the remaining storage volume of the connected
iPhone/iPod is sufficient to hold the song’s tag information, it will be
saved on the iPhone/iPod.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Press
VIEW
while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
For details, refer to “Displaying the Text” on page 19.
Содержание CDA-117Ri
Страница 2: ......
