PD9B01M0 1ST ISSUE 1/07/2019 17
✓
Aft cabin bulkhead and baggage compartment floor
– access to:
-
inspection of aft fuselage section and attachments;
-
inspection of elevator/rudder control system and of cable pulleys for rudder control;
-
access to flap actuator.
✓
Forward cabin central fairing - access to:
-
the fuel valves;
-
the rudder control cables;
-
retractable landing gear mechanism (if applicable).
✓
Instrument panel cover - access to instrumentation and radio;
✓
Engine cowling - access to:
-
engine and related systems;
-
access to main components of electrical system;
-
access to nose gear strut and steering assembly mechanism.
✓
Propeller spinner - access to propeller hub.
✓
Main and nose landing gear fairings
– access to:
-
Wheel and tires;
-
Wheel installation bolts;
-
Brakes pad and discs;
2.2 Airframe and systems inspection schedule
Airframe and systems inspection schedule is as follows:
✓
Inspections for airworthiness before first flight of day as specified in POH;
✓
First inspection at 25 hours (In order to improve the maintenance attention and the overall
safety, based on the company experience and mainly based on the engine early operation
issue, the company, in addition to the 100 hr inspection, requires the first scheduled
maintenance at 25 hours);
✓
Periodic inspections at every 100 hours;
✓
Special inspections, added to normal periodic inspections;
✓
Singular inspection, when aircraft has been exposed to conditions that may have damaged
one or more of its components;
✓
If aircraft
is rarely used, a “100-hour inspection” must be performed yearly;
✓
Replacement of parts subjected to usage limitations are specified in the ANNEX A;
2.3 Inspections and checks
Inspections and checks, unless specifically indicated, apply the following:
✓
Structures in general: Condition of panel covers, ribs, frames, stringers etc., absence of
cracks, deformation, corrosion and any other apparent sign of damage;
✓
Moving parts: Lubrication, security of attachment, securing of bolts, absence of excessive
play, proper adjustment, proper travel, condition of attachments and hinges, absence of
corrosion, deformation, cleanliness;
✓
Fluid lines and hoses: Absence of leaks, cracks, dents, chafing, proper radius,
deterioration;
✓
Bolts and attachments: Proper tightening and securing, absence of cracks or nicks, damage
to thread, wear and excessive play, absence of any corrosion form.