RBMS Plus Installation and Opera
RBMS Plus Installation and Operation Manual
Alpha Technologies Ltd. | www.alpha.ca
PAGE 22
0370260-J0 Rev B
The top two thirds of the screen display the present configuration. The menu at the bottom of the screen displays the
setup menu.
NOTE:
Closing the Telnet window will terminate the Telnet session and reset the RBMS Plus. To avoid resetting
the RBMS Plus, exit by pressing “8” followed by “Enter”.
4.8.1.
Server Setup (0)
Various options can be controlled by setting the IP address. For static IP address operation, the IP address should be set
to the address assigned by the IT department or other authority. Other IP address options are as follows:
If the IP address is set to 0.0.0.0 – DHCP is enabled.
If the IP address is set to 0.0.1.0 – DHCP is enabled and AutoIP is disabled.
If the IP address is set to 0.0.9.0 – DHCP is enabled, DHCP option 81 is disabled, and AutoIP is disabled.
