6.
3
.1
Installation and Set Up
The following tools and materials are needed:
Computer with network card and web browser
Cross over cable or hub
The UPS Final IP Address and Subnet Mask and, if needed, the Default Gateway and the DNS Server
addresses
CAUTION!
To successfully complete this procedure, you should have a working knowledge of network protocols
and how to configure them. Consult your network administrator for details.
If multiple UPS are installed on the same network, configure each unit’s IP address before the installation.
(See "Figure 1 — FXM 650 (top) and FXM 1100/2000 front panel description" on page 7.) Each UPS on the
network MUST have its own unique IP ad- dress.
Procedure
1. Connect the Alpha FXM to a personal computer with either the cross over cable or through a hub.
2. Switch on the personal computer.
3. Configure the network card to talk to the FXM communication module. The module default address is
4. Cut and paste the IP address into the browser and press ENTER.
5. Select
Communications > Configure TCP/IP
in the home screen (Figure 12).
6. Configure the TCP/IP properties according to your network requirements.
7. Click
Apply Settings
.
Figure 13 — Communications screen
Page
32
to
95