ENGLISH
Quick Install Guide
802.11a/b/g/n USB module
Thank you for purchasing the Xtreme N® Dual Band USB Adapter. Follow the
easy steps in this guide to properly set up your adapter. Please verify that all the
package contents listed below are available.
DWA-160
If any of the above items are missing, please contact your reseller.
Before You Begin
Before installing your new wireless
module
, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless adapters.
• Verify the settings such as the wireless network name (SSID) and security
settings of the network(s) you want to connect to.
Note:
If you’ve installed a different manufacturer’s adapter or a different model
module
, make sure the software is uninstalled before installing the new
software. Some utilities may cause a conflict with the new software. Windows
®
7,
Windows Vista
®
and XP users may use the built-in wireless utility.
What This Product Does
The
WUS-ND12
A is an
802.11a/b/g/n USB module
that delivers unrivaled
performance for your laptop or desktop computer. Once connected, access your
network’s high-speed Internet connection while sharing photos, files, music,
video, printers, and storage.
Package Contents
WUS-ND12A
802.11a/b/g/n USB module
CD with drivers and software
• A desktop computer with an available USB slot
• Windows® 7, Windows Vista® (32/64-bit), XP (32/64-bit with Service Pack 2 or
higher)
• 300MHz processor and at least 64MB of RAM
• An 802.11n, 802.11g or 802.11a access point or wireless router
System Requirements
Note: Do NOT plug the adapter into your computer before installing the
drivers.
Insert the
WUS-ND12A
Driver CD into the CD-ROM drive. When the autorun screen
appears, click
Install
and follow the on-screen instructions to install the wireless
adapter drivers and software.
Installation
If the CD Autorun function does not automatically start on your computer, go to
Start
>
Run
. In the run box type “
D:\autorun.exe
” (where D: represents the drive
letter of your CD-ROM drive) and click
OK
.
