Page 17 of 33
Description – This sub-menu allows the user to alter any of the three user defined 4-
digit security codes see 8.4 above.
Operation – In the ‘Setup Menu’ select the ‘Security’ option. In the ‘Select Code’ sub-
menu run through the options until the required code is highlighted; confirm the
selection by pressing the ‘ ’ key. The user is then requested to enter the current (old)
security code. If the correct code is entered, the user is then requested to enter the new
security code. Failure to enter the correct code will drop the user back into the ‘Setup
Menu’. The default value for all security codes is ‘1000’
Note: ‘0000’ is a special code that deactivates the security code for the selected functions.
Where ‘0000’ is used, the security code screen will be bypassed.
11.1.7
Time and Date
Description – This function allows the user to view the set ‘Time’ and ‘Date’ without
having to enter the Set Clock function (see section 9.1.8).
Operation – In the ‘Setup Menu’ select the ‘Time and Date’ option.
11.1.8
Set Clock
Description – The Clock option allows the user set the SADPminiEx internal Real Time
Clock.
Operation – In the ‘Setup Menu’ select the ‘Set Clock’ option. The user is prompted to
enter the Date in the DD/MM/YY format followed by the time in the HH:MM:SS in 24-
hour format.
Note: Although the second’s digits are displayed they are not selectable
11.1.9
Information
Description – The Information menu displays all of the SADPminiEx current settings.
Operation – In the ‘Setup Menu’ select the ‘Information’ option. The ‘Information’ sub-
menu allows the user to run through the displayed data using the ‘
’ and ‘
’ keys.
The menu can be exited by pressing the ‘ ’ key at any location or by scrolling to the
Exit option.
Note: There are no selectable operations from this menu; it is purely for information purposes.
Displayed Information
Description
VerNo
5.11
Software Version Number
Serial
Unit Serial Number
