zz
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 69 of 75
Your Smart Energy
11.
Uninstallation & Return
11.1 Removing the Product
Procedure
Step 1
Power off the product by following instructions in chapter 9.3 Powering Off the Product.
Step 2
Disconnect all cables from the product, including communication cables, PV power
cables, battery power cables, AC cables, and PE cables.
Step 3
Remove the WiFi module from the inverter.
Step 4
Remove the inverter from the wall bracket.
Remove the battery pack from the wall bracket.
Step 5
Remove the mounting bracket.
11.2 Packing the Product
If the original packaging is available, put the battery pack or inverter inside it and then
seal it using adhesive tape.
If the original packaging is not available, put the battery pack or inverter inside a
suitable cardboard box and seal it properly.
11.3 Disposing of the Product
If the battery pack or inverter service life expires, dispose of it according
to the local disposal rules for electrical equipment and electronic
component waste.
Dispose of the packaging and replaced parts according to the rules at
the installation site where the device is installed.
Do not dispose the inverter and the battery pack with normal domestic
waste.
