___________________________________________________________________
Alpha ESS Co., Ltd.
Page 68 of 74
Your Smart Energy
11.
Uninstallation & Return
11.1
Removing the Product
Procedure
Step 1:
Power off the product by following instructions in Chapter 9.3 Powering Off
the Product.
Step 2:
Disconnect all cables from the product, including communication cables, bat-
tery power cables, AC cables, and PE cables.
Step 3:
Remove the WiFi module.
Step 4:
Remove SMILE-S5 from the wall bracket.
Step 5:
Remove the mounting bracket.
11.2
Packing the Product
If the original packaging is available, put SMILE-S5 inside it and then seal it using
adhesive tape.
If the original packaging is not available, put SMILE-S5 inside a suitable cardboard
box and seal it properly.
11.3
Disposing of the Product
If SMILE-S5 service life expires, dispose of it according to the local disposal
rules for electrical equipment and electronic component waste.
Dispose of the packaging and replaced parts according to the rules at
the installation site where the device is installed.
Do not dispose SMILE-S5 with normal domestic waste.
