zz
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 23 of 69
Your Smart Energy
6.3
Mounting Inverter and Expansion Battery Pack
WARNING
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or
mounted.
• Transport and lift the product carefully. Take the weight of the product into account.
• Wear suitable personal protective equipment for all work on the product.
CAUTION
Risk of injury due to damaged cables
There may be power cables or other supply lines (e.g., gas or water) routed in the wall.
• Ensure that no lines are laid in the wall which could be damaged when drilling holes.
6.3.1
Mounting the SMILE-B3-PLUS
Dimensions of wall bracket (mm)
The steps to mount the SMILE-B3-PLUS are listed below:
1.
Remove the wall bracket from SMILE-B3-PLUS, place the wall bracket on the wall
where the system will be installed, and use a marker to locate the bracket.
NOTE:
Considering the battery expansion, the bottom of the wall bracket should be at least
500 mm above the ground.
