SEED-DRILLSSEMINATRICE PNEUMATICA JET-M
Old Cod.Q00A00168
New Cod. MANT2018/00060 R.2
MAINTENANCE
- 26
Copyright ©2009 della Alpego srl ® -Tutti i diritti sono riservati. È espressamente vie
tata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego srl
6.3. EMPTYING THE SEED FROM THE HOPPER
In order to remove the seeds from the hopper it is
necessary to:
1.
Connect a flexible hose having a diameter of
70mm. with the outlet hose
A
2.
Position a container under the end of the flexible
hose
3.
Loosen the hand-wheel
B
4.
Open the outlet shutter by means of the handle
C
5.
Discharge the seed product completely
6.
Once all the seeds have been discharged close
the shutter.
6.4. END OF SEASON OPERATIONS
At the end of the season or if the equipment is not to be used for a long period of time, it is advisable to:
Carefully remove all the seeds from the hopper and the distribution organs
Wash the equipment with plenty of water, in particular the tank, then dry it.
Accurately check and if necessary replace any damaged or worn parts.
Tighten all screws.
Place a layer of lubricant on all unpainted parts.
Protect the equipment with a sheet of cloth.
Place the equipment on a dry, flat surface and keep it out of the reach of unauthorised people.
It goes to your advantage if you find the machine ready for use the next time.
