SEED-DRILLSSEMINATRICE PNEUMATICA JET-M
Old Cod.Q00A00168
New Cod. MANT2018/00060 R.2
MAINTENANCE
- 25
Copyright ©2009 della Alpego srl ® -Tutti i diritti sono riservati. È espressamente vie
tata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego srl
6. MAINTENANCE
6.1. CHECKS AND CONTROLS
During the first 8 working hours it is a good idea to check that all bolts are tight, because the force generated while working
creates structure adjustment. If necessary, tighten as indicated in the table. Every 50 working hours, check the tightness of the
coulters and the springs of the seed covering harrow.
Chart of the tightening torques (Nm)
8.8
[ Nm ]
10.9
[ Nm ]
12.9
[ Nm ]
13
M 8
1.25
25
37
44
1.00
27
40
47
17
M 10
1.50
50
73
86
1.25
53
78
91
19
M 12
1.75
86
127
148
1.25
95
139
163
22
M 14
2.00
137
201
235
1.50
150
220
257
24
M 16
2.00
214
314
369
1.50
229
336
393
27
M 18
2.50
306
435
509
1.50
345
491
575
30
M 20
2.50
432
615
719
1.50
482
687
804
32
M 22
2.50
502
843
987
1.50
654
932
1090
36
M 24
3.00
744
1080
1240
2.00
814
1160
1360
6.2. LUBRICATION
Always read the warnings given on the containers carefully. Always keep oils and greases out of the reach of
children. Avoid contact with the skin. Wash hands well after using these products. Treat used oils in
conformity with current antipollution laws.
When starting the equipment for the first time, check and if necessary lubricate the following components:
INTERVAL
H=HOURS
OPERATION
every
8/10
working hours
- GREASE THE TIE ROD GREASERS
- GREASE THE ROW MARKING DISC GREASERS
Lubrication should be increased if the machine is being used in heavy duty conditions.
