USING WITHOUT REMOTE CONTROL
If your remote control doesn’t work (you don’t have any batteries, or it’s out of service ...) you can use
the control panel (2).
STARTING:
Press M/A button (5). The appliance starts to fan.
POWER SETTING:
Press «
» (5) button to select low power (1000 W).
Press again «
» (5) button to select high power (2000 W).
Temperature cannot be controlled. The appliance will fan only or heat.
TIMER:
Use Min. button (10) to select time from 30 min to 7h30.
STOP:
Press «
» button (5) to switch off the heater.
CLEANING
- Switch off and unplug the appliance.
- The dust may be removed with a soft cloth or a vacuum cleaner.
- Clean the body with a soft, dry cloth (never immerse appliance in water), do not allow water to run
into the interior of the heater.
11
Notice RCMB 21:notice RC_20ET 11/06/12 16:00 Page 11