2. Position the Floor Panel
Place the Floor Panel on a level surface. The Floor Panel is
labeled to indicate front vs. back. To avoid damaging your
floor, do not move the sauna after assembly; prior to
assembly, select a location within reach of a power outlet
and pay attention to the orientation of the door to make
sure nothing will block it.
3. Place the Back and Left Panels
The Back Panel is distinguished by the Bench Support mount.
Have someone hold the Back Panel in place while you
position the Left Panel. (The Left Panel should sit all the way
back and overlap the edge of the Back Panel.) Using the
provided screws and the pre-drilled holes, screw the Left
Panel into the Back Panel.
1. Lay out All Sauna Components
Package includes Floor Panel, multiple Wall Panels, pre-
assembled Bench Sections, Roof Panel with Dust Cover, and
Top Front Plate. Make sure that the Wall Panels are right
side up. The top of each panel is distinguished by the Roof
Panel Support edge; additionally, the pre-positioned cords
supplying power to the carbon fiber heating panels will
emerge from the sauna at the top.
4. Place the Right Panel
The Right Panel is distinguished by its decorative groove at
the top. It is also thicker than the left panel and has a small
groove on the outside-facing wall. Position the Right Panel
so that it sits all the way back and overlaps the edge of the
Back Panel. Using the provided screws and the pre-drilled
holes, screw the Right Panel into the Back Panel.
NOTE:
You may choose to do Step 5 or Step 6 first according
to your personal preference.
5. Place the Front Panel
The Left Panel will overlap the edge of the Front Panel, and
the Front Panel will overlap the edge of the Right Panel.
Using the provided screws and the pre-drilled holes, screw
the Left Panel into the Front Panel and the Front Panel into
the Right Panel.
Separate the door handles and reattach to the door, one
handle on each side.
Bench Support mount
Roof Panel Support edge
