Survey and Mapping Standard Edition Instruction Manual
6.
Precautions for use
1. The receiver GNSS antenna must be installed in an outdoor open air
environment (to avoid blocking), otherwise the device will not work properly.
2. The power supply voltage of the receiver must be 7~35VDC.
3. The cables of the receiver must be firmly connected, and no virtual connection
is allowed. Otherwise, the normal operation of the system will be affected.
4. Precautions for electromagnetic environment, GNSS equipment may be
interfered by other radio equipment, such as wireless bridges, wireless
Line routing, cameras, walkie-talkies, car alarms, cell phone signal jammers, etc.
may interfere with GNSS signals and electricity.
If the signal of the station is used, the electromagnetic environment needs to be
considered in the working area.
5. When configuring the receiver, please ensure that the power supply and
positioning of the receiver are normal.
6. Please complete the cable connection related to the receiver before powering
on.
7. The equipment needs to take waterproof, dustproof and lightning protection
measures when working.
14