Allworx PowerFlex P810, Руководство пользователя

Страница: 165 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.21 Trap Event Severity
Use the function to set an Alarm trap and get the Event log. Use the Trap Events Configuration function
to enable the switch to send out the trap information while pre-defined trap events occur.
To configure the Trap Event Severity via the web interface:
1. Navigate to Configuration > Trap Event Severity Configuration .
2. Select the Group name and Severity Level
3. Click
Apply
or click
Reset
to cancel changes and revert to previously saved values. 0.
Figure 109:
Trap Event Severity Configuration
Parameter Description
Group Name The field for which to generate Trap Events.
Severity Level Select the event type. The options are “Emerg, Alert, Crit, Error, Warning, Notice,
Info and Debug”,
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 157