- 48 -
Event Configuration >> GPIO Trigger
Select the
Enable
option to enable the GPIO trigger function of the
camera, so that you can set Trigger Out function or send captured
images within the detecting area to the FTP server, email receiver,
Network Storage server, or the connected USB device. You have to
configure corresponding settings, such as FTP server and email
server, to enable this feature.
-
Schedule Profile:
Select a schedule profile from the pull-down
list.
-
Action:
Set the
Trigger Out
function or select the destination
of the captured images:
Save Image to USB
,
Record to
Network
,
Storage
,
Send Email
, or
FTP Upload
.
NOTE
Setting the Pre-event/Post-event time for sending email or
uploading to FTP may cause the system overloads.
