- 4 -
3. Connect the LAN1/LAN2 port to your Ether-
net-equipped device.
4. Connect the power adapter to the DC IN
port into a wall outlet.
The figure above shows how to connect a ca-
ble modem to a home phoneline network. Fol-
low the same steps to connect any Ethernet
device such as a STB or PC, to a home phone-
line network.
After properly connected the LAN port, HPNA
port and the DC IN port, LED will be as:
PWR
ON
LAN Link/Act
ON
HPNA Link/Act
ON (Green or Orange)
For more information on LEDs, see section
"LED Indicators on the Rear Panel"
