Camera interfaces
STINGRAY Technical Manual
V4.4.2
93
Camera interfaces
This chapter gives you detailed information on status LEDs, inputs and out-
puts, trigger features and transmission of data packets.
IEEE 1394b port pin assignment
The IEEE 1394b connector is designed for industrial use and has the following
pin assignment as per specification:
Note
For a detailed description of the camera interfaces
(FireWire, I/O connector), ordering numbers and operat-
ing instructions see the Hardware Installation Guide,
Chapter
Camera interfaces
.
Read all Notes and Cautions in the Hardware Installation
Guide, before using any interfaces.
Figure 43: IEEE 1394b connector
Note
•
Both IEEE 1394b connectors with
screw lock
mecha-
nism provide access to the IEEE 1394 bus and thus
makes it possible to control the camera and output
frames. Connect the camera by using either of the con-
nectors. The other connector can be used to daisy chain
a second camera.
•
Cables with latching connectors on one or both sides
can be used and are available with lengths of 5 m or
7.5 m. Ask your local dealer for more details.
1
2
3
4
5
6 7 8
9
Pin
Signal
1
TPB-
2
TPB+
3
TPA-
4
TPA+
5
TPA (Reference ground)
6
VG (GND)
7
N.C.
8
VP (Power, VCC)
9
TPB (Reference ground)