Camera Link registers
98
Goldeye Camera Link Register Controls Reference V1.0.0
NonUniformityCorrection (subcategory)
Every pixel of an InGaAs sensor possesses its individual amount of dark signal and
an individual sensitivity for light. Thus, while exposing, each sensor creates a
specific, non-uniform underlying pattern. This pattern can be compensated with
help of the non-uniformity correction.
This category contains functionalities that allow to control the non-uniformity
correction.
RegNUCDatasetActive
The index of the active data set, starting at 0. Writing to this register changes the
active data set, meaning it activates the data set indexed.
The maximum value allowed depends on the number of valid data sets in the
camera and is reported by
RegNUCDatasetCount
. The mapping of an index value
to a specific correction data file may vary from camera to camera or after
correction data modifications.
Use
RegNUCDatasetSelector
and corresponding functionalities to retrieve more
information about the data sets.
Display name
NonUniformityCorrection
Origin of
functionality
Camera
Control type
(Subcategory)
Category
/ImageCorrectionControl
Register name
RegNUCDatasetActive
Register type
IntReg
Access mode
R/W
Address
0x00090004
Length (Bytes)
4
Bits used
31..0
Possible values
Description
(None)
Default
0
Minimum
(Camera dependent)
Maximum