Allied Vision Goldeye CL Series, Техническое руководство

Страница: 36 / 254

Compliance, safety, and intended use
36 Goldeye G/CL Technical Manual V4.2.0
Optical components
Provide the following conditions to keep dirt and droplets out of the optical system
of camera and lens:
•
Dust-free environment
• Low relative humidity
• No condensation.
When camera or lens are stored:
•
Cover the lens mount with a protection foil or cap.
• Cover front and back lens with caps.
Sensor
Sensors are sensitive to excessive radiation: focused sunlight, lasers, and X-rays can
damage the sensor. Dirt and scratches can damage the sensor as well.
Goldeye G/CL cameras do not need additional cleaning. Cameras are cleaned
before shipping. Incorrect cleaning can damage the sensor or the optical filter.
Therefore, never clean the sensor or the optical filter.
Protect the optical filter and the sensor from dirt, because dirt becomes more
visible the closer it gets to the sensor. In addition, keep the back lens clean. Hold
the camera with the lens mount facing the ground to keep dirt out of the lens
mount.
Lenses
Maximum protrusion
The sensor, optical filter, lens, or camera electronics can be damaged if a lens
exceeding maximum protrusion is mounted to the camera. Use lenses with a
maximum protrusion within camera specifications.
Figure 1: Holding the camera with the lens mount facing the ground