
Camera interfaces
132
Alvium G1 User Guide V1.1.1
I/Os and GPIOs
Isolated input description
The input can be connected directly to the system for voltages up to 24 VDC.
An external resistor is not necessary.
I/O use for UART
Table
73
shows which values must be selected to control I/Os using
LineSelector.
Signal
LineSelector (GenICam)
UART line
EXT-GPIO 0
Line0
Not applicable
EXT-GPIO 1
Line1
Not applicable
EXT-GPIO 2
Line2
UART Tx
EXT-GPIO 3
Line3
UART Rx
Table 73: Value settings to control I/Os using the LineSelector feature
Feature descriptions and firmware downloads
www.alliedvision.com/en/support/
technical-documentation/alvium-gige-documentation
www.alliedvision.com/en/support/firmware-downloads
Figure 53: Input block diagram
i
GPI3
OPT IN GND
External Internal
180R