C613-50170-01 Rev B
Command Reference for x510 Series
707
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
INK
A
GGREGATION
C
OMMANDS
LACP
SYSTEM
-
PRIORITY
lacp system-priority
Overview
Use this command to set the system priority of a local system. This is used in
determining the system responsible for resolving conflicts in the choice of
aggregation groups.
Use the
no
variant of this command to reset the system priority of the local system
to the default.
Syntax
lacp system-priority
<1-65535>
no lacp system-priority
Default
The default is 32768.
Mode
Global Configuration
Example
awplus#
configure terminal
awplus(config)#
lacp system-priority 6700
Parameter
Description
<1-65535>
LACP system priority. Lower numerical values have higher priorities.
