C613-50170-01 Rev B
Command Reference for x510 Series
706
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
INK
A
GGREGATION
C
OMMANDS
LACP
PORT
-
PRIORITY
lacp port-priority
Overview
Use this command to set the priority of a device port. Ports are selected for
aggregation based on their priority, with the higher priority (numerically lower)
ports selected first.
Use the
no
variant of this command to reset the priority of port to the default.
Syntax
lacp port-priority
<1-65535>
no lacp port-priority
Default
The default is 32768.
Mode
Interface Configuration
Example
awplus#
configure terminal
awplus(config)#
interface port1.0.5
awplus(config-if)#
lacp port-priority 34
Parameter
Description
<1-65535>
Specify the LACP port priority.
