C613-50170-01 Rev B
Command Reference for x510 Series
496
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
I
NTERFACE
T
ESTING
C
OMMANDS
SERVICE
TEST
service test
Overview
This command puts the device into the interface testing state, ready to begin
testing. After entering this command, enter Interface Configuration mode for the
desired interfaces and enter the command
Do not test interfaces on a device that is part of a live network—disconnect the
device first.
Use the
no
variant of this command to stop the test service.
Syntax
service test
no service test
Mode
Global Configuration
Example
To put the device into a test state, use the command:
awplus(config)#
service test
Related
Commands
