Allied Telesis x510-28GPX, Справочник по командам

Страница: 2600 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2600
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
SNMP C
OMMANDS
SNMP
-
SERVER LOCATION
snmp-server location
Overview This command sets the location of the system. The location is:
• displayed in the output of the show system command
• stored in the MIB object sysLocation
The no variant of this command removes the configured location from the system.
Syntax snmp-server location < location-name >
no snmp-server location
Mode Global Configuration
Example To set the location to “server room 523”, use the following commands:
awplus# configure terminal
awplus(config)# snmp-server location server room 523
Related
Commands
show snmp-server
show system
snmp-server contact
Parameter Description
< location-name >
The location of the system, from 0 to 255 characters long. Valid
characters are any printable character and spaces.