C613-50170-01 Rev B
Command Reference for x510 Series
2072
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
V
IRTUAL
C
HASSIS
S
TACKING
(VCS
TACK
™) C
OMMANDS
SHOW
COUNTER
STACK
show counter stack
Overview
Use this command to display stack related counter information.
Syntax
show counter stack
Default
All counters are reset when the stack member is rebooted.
Mode
User Exec and Privileged Exec
Usage
This displays the stacking counter information for every stack member.
Examples
To display the stacking counter information about the whole stack, use the
following command.
awplus#
show counter stack
Figure 50-1:
Example output from the
show counter stack
command
Virtual Chassis Stacking counters
Stack member 1:
Topology Event counters
Units joined .........1
Units left .........0
Links up .........1
Links down .........0
ID conflict .........0
Master conflict .........0
Master failover .........0
Master elected .........1
Master discovered .........0
SW autoupgrades .........0
Stack Port 1 Topology Event counters
Link up .........3
Link down .........2
Nbr re-init .........0
Nbr incompatible .........0
Nbr 2way comms .........1
Nbr full comms .........1
Stack Port 2 Topology Event counters
Link up .........0
Link down .........0
Nbr re-init .........0
Nbr incompatible .........0
Nbr 2way comms .........0
Nbr full comms .........0
