Allied Telesis x510-28GPX, Справочник по командам

Страница: 197 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 197
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
U
SER
A
CCESS
C
OMMANDS
TERMINAL LENGTH
terminal length
Overview Use the terminal length command to specify the number of rows of output that
the device will display before pausing, for the currently-active terminal only.
Use the terminal no length command to remove the length specified by this
command. The default length will apply unless you have changed the length for
some or all lines by using the
length (asyn) command.
Syntax terminal length < length >
terminal no length [< length >]
Mode User Exec and Privileged Exec
Examples The following example sets the number of lines to 15:
awplus# terminal length 15
The following example removes terminal length set previously:
awplus# terminal no length
Related
Commands
terminal resize
length (asyn)
Parameter Description
< length >
<0-512> Number of rows that the device will display on the
currently-active terminal before pausing.