C613-50170-01 Rev B
Command Reference for x510 Series
1455
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-DM C
OMMANDS
SHOW
IP
PIM
DENSE
-
MODE
INTERFACE
show ip pim dense-mode interface
Overview
This command displays the PIM-DM interface information.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip pim dense-mode interface
Mode
User Exec and Privileged Exec
Example
To display information about the PIM-DM interfaces, use the command:
awplus#
show ip pim dense-mode interface
Output
Total configured interfaces: 24 Maximum allowed: 32
Total active interfaces: 22
Address Interface VIFIndex Ver/ Nbr
Mode Count
192.168.1.53/24 vlan2 0 v2/D 2
192.168.2.1 vlan3 2 v2/D 0
...
Note that this screen has been edited to remove any additional
interfaces.
Table 1:
Parameters in the output of the
show ip pim dense-mode interface
command
Parameter
Description
Total configured
interfaces
The number of configured PIM Dense Mode interfaces.
Maximum allowed
The maximum number of PIM Dense Mode interfaces that
can be configured.
Total active
interfaces
The number of active PIM Dense Mode interfaces.
Address
Primary PIM-DM address.
Interface
Name of the PIM-DM interface.
VIF Index
The Virtual Interface index of the VLAN.
Ver/Mode
PIM version/Dense mode.
Nbr Count
Neighbor count of the PIM-DM interface.
