Allied Telesis x510-28GPX, Справочник по командам

Страница: 1340 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1340
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM C
OMMANDS
IP PIM JP
-
TIMER
ip pim jp-timer
Overview Use this command to set the PIM-SM join/prune timer. Note that the value the
device puts into the holdtime field of the join/prune packets it sends to its
neighbors is 3.5 times the join/prune timer value set using this command.
Use the no variant of this command to return the PIM-SM join/prune timer to its
default value of 60 seconds, which corresponds to a join/prune packet holdtime of
210 seconds.
Syntax
ip pim jp-timer < 1-65535 >
no ip pim jp-timer [< 1-65535 >]
Default The default join/prune timer value is 60 seconds.
Mode Global Configuration
Example To set the join/prune timer value to 300 seconds, use the commands:
awplus# configure terminal
awplus(config)# ip pim jp-timer 300
To return the join/prune timer to its default value of 60 seconds, use the
commands:
awplus# configure terminal
awplus(config)# no ip pim jp-timer
Parameter Description
< 1-65535 >
Specifies the join/prune timer value. The default value is 60 seconds.